Total for the last 12 months
number of access : ?
number of downloads : ?
ID 114176
Title Alternative
ポリエーテルエーテルケトンの表面処理が常温重合レジンとの接着に及ぼす影響
Author
Kurahashi, Kosuke Tokushima University
Keywords
Polyetheretherketone (PEEK)
Shear bond strength
Acrylic resin
Clasp retainer
Content Type
Thesis or Dissertation
Description
These days, new prosthodontic materials are appearing with the development of digitalization. Among these, the use of polyetheretherketone (PEEK) as the clasp of removable partial dentures has been proposed. The adhesive strength between the PEEK and acrylic resin influences the probability of denture fracture. To investigate the effect of PEEK surface treatments on the shear bond strength to acrylic resin, five surface treatment conditions of PEEK were analyzed: 1. no treatment; 2. ceramic primer application; 3. Al2O3 sandblasting; 4. Rocatec; and 5. Rocatec with ceramic primer application, comparing with a metal primer-treated Co-Cr alloy. Two kinds of autopolymerizing resin (Unifast II and Palapress Vario) were used as bonding materials. The specimens were evaluated to determine the bond strength. Rocatec treatment with ceramic primer application yielded the highest bond strengths (12.71 MPa and 15.32 MPa, respectively, for Unifast II and Palapress Vario). When compared to a metal primer-treated Co-Cr alloy, the bond strength of PEEK to Unifast II was similar, whereas it was about 60% of that to Palapress Vario. Rocatec treatment, combined with ceramic primer, showed the highest bond strength of PEEK to acrylic resin. Treatment of PEEK will enable its use as the clasp of removable dentures and the fixation of PEEK prostheses.
Journal Title
Dentistry Journal
ISSN
23046767
Publisher
MDPI
Volume
7
Issue
3
Start Page
82
Published Date
2019-08-01
Remark
内容要旨・審査要旨・論文本文の公開
本論文は,著者Kosuke Kurahashiの学位論文として提出され,学位審査・授与の対象となっている。
Rights
This is an open access article distributed under the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/4.0/ ) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited
EDB ID
DOI (Published Version)
URL ( Publisher's Version )
FullText File
language
eng
TextVersion
ETD
MEXT report number
甲第3344号
Diploma Number
甲口第453号
Granted Date
2020-01-09
Degree Name
Doctor of Dental Science
Grantor
Tokushima University
departments
Oral Sciences
University Hospital