ID | 116260 |
著者 |
Ghalme, S.
Sandip Institute of Technology & Research Centre
Bhalerao, Y.
University of East Anglia
|
キーワード | Lubricant nano additives
Aluminium Oxide (Al2O3) Nanoparticles
Load
Wear Scar Diameter
Coefficient of Friction
Taguchi-Grey Relational Analysis
|
資料タイプ |
学術雑誌論文
|
抄録 | Minimizing friction and wear in between mating parts is the main concern in the field of tribological studies. Lubricants with improved tribological properties are continuously explored for minimizing friction and wear. In the present work, an attempt has been made to evaluate the effect of the addition of aluminium oxide (Al2O3) nanoparticles as lubricant additives on the tribological performance of base lubricant oil (SAE10W40) using four-ball tester. Weight in the percentage of Al2O3 nanoparticles was added in base oil and evaluated the effect of additives on wear preventive characteristic and coefficient of friction of base lubricant oil.
Integrated Taguchi-Grey relational approach is implemented to obtain the optimum combination of load and % wt. of Al2O3 nanoparticle addition for improving the tribological performance of base lubricant oil. With a load of 250 N and 0.5 wt% of Al2O3 nanoparticles shows an optimum combination for the improved tribological performance of base oil. The wear scar diameter and coefficient of friction found to be reduced by 20.75 % and 22.67 % respectively with the addition of 0.5 wt% of Al2O3 nanoparticles in base lubricant oil. The lubrication performance seems to be improved because of mending effect and ball bearing effect of Al2O3 nanoparticles forming a self-protective film on the friction surface. |
掲載誌名 |
Tribology in Industry
|
ISSN | 03548996
22177965
|
出版者 | University of Kragujevac
|
巻 | 42
|
号 | 3
|
開始ページ | 494
|
終了ページ | 502
|
発行日 | 2020-09-15
|
権利情報 | This is an open access journal which means that all content is freely available without charge to the user or his/her institution. All papers are licensed under a Creative Commons Attribution- NonCommercial 4.0 International License(https://creativecommons.org/licenses/by-nc/4.0/). The journal will adopt CC BY NC licence which means authors and readers can share, copy and redistribute the material in any medium or format or adapt, remix, transform, and build upon the material. This is enabled under the terms of Attribution (You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use) and NonCommercial usage of the material (You may not use the material for commercial purposes).
|
EDB ID | |
出版社版DOI | |
出版社版URL | |
フルテキストファイル | |
言語 |
eng
|
著者版フラグ |
出版社版
|
部局 |
理工学系
|